MiR Charge 24V
MiR Charge 24V is a fully automatic charging station that lets MiR robots autonomously reload their batteries as needed. This small, non-intrusive charging station uses standard power and can be easily integrated into almost any environment.
Keep robots running around the clock
Your MiR100 or MiR200 robot will never run out of power in the middle of a job. MiR Charge 24V is a fully automatic charging station that offers flexible deployment options to meet your needs.
Collaborates with MiR Fleet
The robot autonomously returns to the charging station and connects when its battery falls under established limits. It can also be programmed to regularly recharge between deliveries, such as when it returns to a stockroom or depot, which can allow the robot to run nearly continuously. MiR Charge 24V fully charges a MiR robot in about two hours. When multiple robots are deployed using MiR Fleet, the system evaluates battery levels and job loads, optimizing utilization and recharging to keep the fleet on the job around the clock.
Discreet and easy to install
MiR Charge 24V is easy and unobtrusive to install in your facility. It uses standard power outlets and its low profile and small footprint give you additional flexibility in how you power and deploy your mobile robot.
|Color||RAL 7035 / Light gray|
|Disclaimer||Specifications may vary based on local conditions and application setup|
|Width||620 mm | 24.4 in|
|Height||350 mm | 13.8 in|
|Depth||120 mm | 4.7 in|
|Weight||10.5 kg | 22 lbs|
|Minimum distance between chargers||100 mm | 3.9 in if the robot can approach the charger in an angle of 80-100° to the wall|
|Wall mounting||To be mounted flush with floor|
|Mounting height above floor||45 mm | 1.8 in from floor to bottom edge|
|Ambient temperature range, operation||5–40°C | 41–104°F|
|Maximum altitude||2 000 m | 6 562 ft|
|Output||24 V, maximum 25 A|
|Input||100-240 V AC, 50-60 Hz|
|Consumption||Nom. 7.3 Amp at 100 V AC, nom. 2.9 Amp at 240 V AC|